SYNERGY RACING 997 COMPETITION PARTS
|
Carbon Hood Part # 997.816.ca A solid carbon fiber hood with no fillers that fits all 997 Porsche’s that is recommended for track purposes only and a 10 pound weight savings from the stock hood. The hood can either be clear coated or primed for paint and does not come with mounting hardware or latches. The hood includes a reinforcing tapped aluminum strip at hinge mounts that work with stock mounting hardware. Locking latch can also be reinforced if requested. Hood weighs 6 – 8 pounds. Primed $3,495.00 Clear coated (as pictured) $3,995.00 |
|
Carbon and Kevlar GT3 Style Rear Bumper Part # 997.815.CA A lightweight rear bumper upgrade with center exhaust port. Carbon and Kevlar mix that makes for a very durable component. Delivered in Carrera white with rear louvers cut out. Does not work with stock rear crash bar unless crash bar is modified. License plate holder and lights would have to added and modified by installer, no interior heat shielding. Please specify if you would like to have a tow hook slot or not with your bumper. Rear bumper painted with out heat shielding weighs 6 -7 pounds. Bumper Painted Carrera White $2,395.00 |
|
Carbon and Kevlar Rolex Rear Bumper Part # 997.815.CA Lightweight carbon and Kevlar rear bumper delivered in Carrera white with louver holes un-cut per Rolex specs. Please specify if you would like to have a tow hook slot or not with your bumper. Rear bumper painted with out heat shielding weighs 6 -7 pounds. Bumper Painted Carrera White $2,395.00 |
|
Carbon Front Bumper with Rolex Splitter Part # 997.819R.CA Completely integrated carbon nose with center radiator exhaust and Rolex splitter. Delivered in Carrera white, does not come with radiator screens or center radiator exhaust port screen. Complete front bumper with integrated splitter weighs 10 -12 pounds. Bumper Painted Carrera White $3,995.00 |
|
Carbon Fiber Running Light Caps Part # 997.812.CA Carbon cap replacement for the stock running light if you plan on a lot of track time and want to save your original equipment. Outer ear has a holding tab and the other side can be either glued or cable tied into the bumper. For a finished and smooth look to this piece you can add Xpel's head light protection kit on the outer surface. Comes in a set of two, right and left. Each cap weighs 2.3 – 2.5 ounces. Black Carbon $449.00 Per Set Red Hybrid Carbon $482.00 Per Set |
|
Carbon Dash Plate Part # 997.808.CA A lightweight but strong replacement for the stock radio/navigation system. Delivered as a blank template that will need to be modified by the installer. Plenty of surface area for all necessary switches and buttons. Please specify either black or red carbon weave. Carbon dash blank weighs 2.2 ounces. Black Carbon $145.00 Red Hybrid Carbon $175.00 |
|
Carbon Floor Plate Part # 997.813.CA Sturdy floor plate that adds some accent to the interior of you GT3 Cup car or serves as a suitable floor for any modified 997. Mounting hardware is not included. Floor board construction consists of ¼” foam core resulting in a weight of 10 ounces. Black carbon $293.00 |
|
Carbon Aero Wing Part # 997.806.CA Truly a work of art from finish to weight and one of our most desired components that serves both style and performance. This item is not Koni Challenge legal due to it’s light weight feature. Wing can be delivered as bare carbon, primed or clear coated. Does not include any mounting hardware, wing element connectors are included. Complete assembly including rear deck and wing element weighs 6 – 8 pounds. Reinforcing tapped aluminum strip at hinge mounts that work with stock mounting hardware. Locking latch for rear deck can also be reinforced if requested. Please request whether you would like the carbon air scoop to be included in the build of this wing for an additional cost. Each deck is built to specific order so please contact Kerrigan Smith to place your order. Air scoop is not included but can be incorporated into the build. Clear coated (as pictured) $4,595.00 Primed deck with clear coated element $3,695.00 Primed complete $3,395.00 |
|
Carbon Aero Wing Air Scoop Part # 997.807.CA A great replacement for the air scoop on the Motorsports GT3 Cup wing and a great addition to the street 997 Aero wing kit. Can be ordered in bare carbon, primed for paint or clear coated. A great accent piece that actually serves a function. Air scoop weighs 1 pound with integrated nut-serts, mounting hardware is not included. Bare carbon unpainted $488.00 Primed $528.00 Clear coated $594.00 |
|
18" BBS Race Wheels Part # 997.605.B (Black center) Part # 997.605.S (Silver center) A three piece wheel designed by BBS and a standard component on all Synergy Competition 997 Build cars. These wheels are designed for track use only and are not for street use. You can not use stock wheel lugs and must upgrade to a wheel stud. This wheel has been used with the Carrera 3.6, 3.8S and the 997 GT3 street car (used for track use only) and come as a 9x18 front wheel and an 11x18 rear wheel. Weight specs as supplied by BBS are 20.75 lbs for the front wheel and 21.75 lbs for the rear wheel. The wheels come in your choice of a black or silver center piece. Front Wheel $1,287.75 each Rear Wheel $1,403.35 each |
|
Adjustable Drop Links Part # 997.410 Fully adjustable drop links for the 997 that are a direct replacement for the stock drop links. Sold as a set with two fronts or two rears, all hardware included. Front $325 Per Set Rear $175 Per Set |
|
Fuel Pump Out Line Part # 997.202 Fuel pump out line that is for the stock street engine of the 997 3.6 or 3.8 engine. Threads directly onto the fuel rail at the engine and has a quick disconnect fitting that can be secured in the engine bay. Mounting hardware for engine bay not included. $160.00 |
Direct Inquiries to Ken Grammer via e-mail to ken@synergyracing.com
or by calling 434.822.8180 x103 any time between 8am and 5pm Eastern Time
